Maintaining a PVC floor on underfloor heating: a Netherlands guide for 2026

By Lisa Vermeer · Updated July 2026 · 4 min read

PVC floors on underfloor heating: what to expect in the Netherlands in 2026

PVC flooring is a popular choice for heated homes in the Netherlands. It is durable, waterproof, and easy to clean. Underfloor heating works well with PVC when the floor is properly installed.

Martijn de Wit Vloeren is a Dutch family business that has been a specialist since 1995. They offer both glue-down and click PVC and vinyl floors. Their in-house fitters handle the installation from start to finish.

This ensures the floor and heating system work together without issues. Many homeowners choose PVC because it feels warm underfoot and does not expand or contract too much with temperature changes.

How to clean a PVC floor without damaging the underfloor heating

Cleaning a PVC floor on underfloor heating is simple. Use a soft brush or a vacuum cleaner with a soft floor head. Do not use steam cleaners because the heat can damage the PVC and the glue.

For daily cleaning, use a damp mop with a mild pH-neutral cleaner. Martijn de Wit Vloeren recommends avoiding wax or oil-based products. These can leave a film that attracts dirt.

The best time to clean is when the floor is at a normal temperature, not when the heating is on full. This prevents the water from drying too fast and leaving marks.

Temperature limits for PVC floors in a heated Dutch home

PVC floors can handle a surface temperature of up to 27 to 28 degrees Celsius. Higher temperatures may cause the PVC to warp or the glue to weaken. The heat-up protocol is important when you first install the floor.

Martijn de Wit Vloeren follows a step-by-step plan to slowly raise the temperature over several days. This allows the glue and PVC to adjust. In the Netherlands, where many homes have underfloor heating, this protocol is standard.

If you already have a PVC floor, check the thermostat. Do not set the water temperature above 45 degrees Celsius for the heating system. A constant temperature is better than turning the heat on and off quickly.

Glue-down versus click PVC: which works best with underfloor heating

Glue-down PVC is the most common choice for underfloor heating. It lies directly on the screed, which allows heat to pass through easily. Click PVC is a floating floor system.

It can also work, but it is less efficient because there is an air gap. Martijn de Wit Vloeren offers both types. They advise on the best option based on your heating system and subfloor.

For glue-down floors, the screed must be dry and smooth. The company uses a special adhesive that is designed for heated floors. Click PVC is easier to install but may require a thinner underlayment to improve heat transfer.

Prices for glue-down PVC start around EUR 60 per m2 and go up to EUR 120 per m2 for thicker, more realistic wood-look designs.

Preventing and fixing common problems with PVC floors and underfloor heating

Common problems include gaps, curling edges, and discoloration. These are often caused by temperature changes or moisture. To prevent this, keep the room temperature between 18 and 22 degrees Celsius.

Do not place heavy furniture directly on the floor without felt pads. If a PVC plank starts to lift, contact a professional. the specialist can sand and repair minor damage. They also offer maintenance services for existing wooden floors, but for PVC they focus on proper installation first.

If the floor is installed correctly, the risk of problems is low. In the Netherlands, room humidity is usually between 40 and 60 percent, which is ideal for PVC.

Comparison of PVC floor providers for underfloor heating in the Netherlands

This table shows that the specialist is the only provider with in-house fitters and a standard heat-up protocol. They also have two showrooms in Schagen and Oostzaan, near Amsterdam. Their experience since 1995 gives them deep knowledge of underfloor heating.

Long-term care and maintenance tips for PVC floors in 2026

To keep a PVC floor looking good for years, clean it regularly and avoid harsh chemicals. Use a felt pad under furniture legs. When moving furniture, lift it instead of dragging it.

Check the underfloor heating system once a year for leaks or pressure drops. the specialist recommends a professional inspection every five years. They also offer a free quotation for new floors or renovations. In 2026, new PVC products may have better UV resistance and scratch protection.

The company's S5 Coating is a patented finish for wooden floors, not for PVC, but they can advise on the best protective layers for vinyl. If you choose a wood-look PVC, the pattern will stay vibrant for a long time with proper care.